Shock explosion proof

JACOB pipeworks has been regularly tested for use in potentially explosive environments since 1980. The products are examined for their shock explosion resistance by means of a gas explosion, dust explosion or stress analysis. The results are documented in test reports from our external partners such as DEKRA GmbH and Inburex Consulting GmbH.

Shock explosion proof up to 1 bar overpressure – pull-ring connection

Pipes and press-formed components up to DN 315 with a wall thickness of 1 to 1.5 mm with (Quick Connect) pull-ring connections made of mild steel and stainless steel were tested.

  • Pipes up to 2 m
  • Pipe with spigots up to 200 mm
  • T-pieces
  • Segments 5 °, 15 °, 30 °, 45 °
  • Pipe bends 1D 90 °, 2D 30 ° / 45 ° / 60 ° / 90 °
  • Forks
  • Symmetrical forks 60 °, 90 °
  • Cone pieces


You can find more information in our catalogue or in the technical information.

Technical information: 1 bar shock-explosion resistance – pull-ring connection
Download

Shock explosion proof up to 3 bar overpressure – pull-ring connection

Pipes and press-formed components up to DN 315 with a wall thickness of 1.5 to 2 mm with (Quick Connect) pull-ring connections made of mild steel and stainless steel were tested.

  • Pipes up to 2 m
  • Pipe with spigots up to 200 mm
  • T-pieces
  • Segments 5 °, 15 °, 30 °, 45 °
  • Pipe bends 1D 90 °, 2D 30 ° / 45 ° / 60 ° / 90 °
  • Forks
  • Symmetrical forks 60 °, 90 °
  • Cone pieces


You can find more information in our catalogue or in the technical information.

Technical information: 3 bar shock-explosion resistance – pull-ring connection
Download

Shock explosion proof up to 3 bar overpressure – loose flange connection

Pipes and press-formed components up to DN 315 with a wall thickness of 2 to 3 mm with loose flange connections made of mild steel and stainless steel were tested.

  • Pipes up to 2 m
  • T-pieces
  • Segments 5° / 3,5D, 15° / 1,5D, 30° / 1,25D, 45° / 1D
  • Pipe bends 1D / 2D 30°, 45°, 60°, 90°
  • Forks
  • Symmetrical forks 60°
  • Cone pieces 30°


You can find more information in our catalogue or in the technical information.

Technical information: 3 bar shock-explosion resistance – loose flange connection
Download

Shock explosion proof up to 10 bar overpressure – angle flange connection

Pipes and press-formed components up to DN 300 with a wall thickness of 2 mm with angle flange connections made of mild steel were tested.

  • Pipes up to 2 m
  • Inspection T-pieces
  • Pipe bends 2D 30°, 45°, 60°, 90°
  • Forks
     

You can find more information in our catalogue or in the technical information.

Technical information: 10 bar shock-explosion resistance – angle flange connection
Download

In order to maintain the shock explosion proof, the pipe parts in operation must be checked regularly for wear and corrosion. Deteriorated components must be replaced.

For more information about shock explosion proof of our products, contact our sales team!

Discover our standard range